Perfect set to begin building your hard stone carving tool inventory. Features traditional 1 1/2 lb. Square Hammer with 10" wood handle All tools made in Vermont from the very best steel and highest quality carbide. Suitable for use in softer stone as well. A great way to get started in stone carving, at an attractive price!
This set contains a 1 1/2 lb. Round Hammer and five carbide tipped chisels: 1/2' Hand Point, 3/8' Hand Chisel, 1/2' Hand Chisel with optional teeth, 3/4' Mallet Head Chisel, and 1 1/4' Mallet Head Chisel, all wrapped in a Trow & Holden Tool Apron. All tools manufactured at our factory in Vermont. Always wear safety glasses.
3/16" x 10" Hard Cap Joint Chisel
62330
Baltimore Tool Works, Inc
55 x 75 inches
Price: $15.45
Tough Reinforced Polymer Cap for Safety Reduces More Than 80% of Sound & Vibration Larger striking surface provides hand protection No metal-to-metal contact
Features and Benefits: Hard Cap has reinvented the struck tool by adding an unbreakable reinforced polymer cap and oil-resistant cushion grip. The result - tools that are safer, more accurate and comfortable to use. Unbreakable, tough, reinforced polymer cap, 2-1/2 times the striking surface of a standard chisel - eliminates flying chips and mushrooming of chisel head; four cap diameters to match hammer sizes Comfortable grip reduces shock by up to 90%; oil and solvent resistant reduces hot/cold feel, enhances gripping ability. Noise level reduced by up to 80%. Hammer kickback and wrist-elbow trauma is minimized. The industrys sharpest and most accurate cutting edge Made in the U.S.A.
SOFT STONE HAND CARVING SET WITH ROUND HAMMER
Trow and Holden Company
44 x 75 inches
Price: $129.00
Perfect set to begin building your soft stone carving tool inventory. 1 1/2 lb. Round Hammer helps avoid mis-strikes! All tools made in Vermont from the very best steel and highest quality carbide. A great way to get started in stone carving, at an attractive price!
This set contains a 1 1/2 lb. Round Hammer and five carbide tipped chisels: 1/2' Hand Point, 3/8' Hand Chisel, 1/2' Hand Chisel with optional teeth, 3/4' Mallet Head Chisel, and 1 1/4' Mallet Head Chisel, all wrapped in a Trow & Holden Tool Apron. All tools manufactured at our factory in Vermont. Always wear safety glasses.
3-1/2" Hard Cap Brick Set
62351
Baltimore Tool Works, Inc
75 x 46 inches
Price: $15.99
Tough Reinforced Polymer Cap for Safety Reduces more than 80% of sound & vibration Larger striking surface provides hand protection No metal-to-metal contact
Features and Benefits: Hard Cap has reinvented the struck tool by adding an unbreakable reinforced polymer cap and oil-resistant cushion grip. The result - tools that are safer, more accurate and comfortable to use. Unbreakable, tough, reinforced polymer cap, 2-1/2 times the striking surface of a standard chisel - eliminates flying chips and mushrooming of chisel head; four cap diameters to match hammer sizes Comfortable grip reduces shock by up to 90%; oil and solvent resistant reduces hot/cold feel, enhances gripping ability. Noise level reduced by up to 80%. Hammer kickback and wrist-elbow trauma is minimized. The industrys sharpest and most accurate cutting edge Made in the U.S.A.
1" Carbide Hand Chisel
Trow and Holden Company
8.5 x 28 x 75 inches
Price: $54.00
Traditional carbide hand chisel for use on granite and softer stone. Highest quality carbide blade lasts and lasts. Use for roughing out, shaping and lettering in stone. Maintains its shape to save you time and money. Use with Trow & Holden Hand Hammer or Round Hammer.
The traditional styling of this chisel makes it perfect for removing material, shaping and lettering by hand in granite or other hard stone. The superior carbide tip means this chisel will maintain its shape for much longer, which saves you time and money. Always wear safety glasses.
MSA Safety Works 10041444 Hands-Off Chisel Grip
10041444
MSA Safety Works
9.9 x 75 x 69 inches
1.15 pounds
List Price: $9.99
Price: $9.99
Helps protect hand against hammer blows Removes easily and quickly for convenient storage in toolbox. Rubber coating dampens striking tool vibration Holds any chisel up to 1" wide
Perfect set to begin building your hard stone carving tool inventory. 1 1/2 lb. Round Hammer helps avoid mis-strikes! All tools made in Vermont from the very best steel and highest quality carbide. Suitable for use in softer stone as well. A great way to get started in stone carving, at an attractive price!
This set contains a 1 1/2 lb. Round Hammer and five carbide tipped chisels: 1/2' Hand Point, 3/8' Hand Chisel, 1/2' Hand Chisel with optional teeth, 3/4' Mallet Head Chisel, and 1 1/4' Mallet Head Chisel, all wrapped in a Trow & Holden Tool Apron. All tools manufactured at our factory in Vermont. Always wear safety glasses.
1 x 1 1/2" Carbide Hand Tracer
Trow and Holden Company
8.5 x 32 x 75 inches
Price: $73.00
Highest quality carbide stone splitting blade lasts and lasts Designed for comfort and endurance. Maintains its shape to save you time and money Made to last since 1890 in Barre, Vermont, USA Many old world masons use this size for rock facing the edge of stone.
The carbide tip Hand Tracer is used for splitting stone or for scoring stone in preparation for trimming or splitting. The carbide blade will retain its shape many times longer than steel, and with proper care will last for years. Specially tempered for use with the Trow & Holden Hand Hammer or Round Hammer. Always wear safety glasses.
3/4 x 12 Guardian Bull Point Concrete Chisel with Hand Guard
80205
Baltimore Tool Works
75 x 24 inches
Price: $14.99
Full Hand, Finger & Knuckle Protection Absorbs shock Bright Safety Orange Color Provides Great Visibility
Tough Reinforced Polymer Cap for Safety Reduces More Than 80% of Sound & Vibration Larger striking surface provides hand protection No metal-to-metal contact
Features and Benefits: Hard Cap has reinvented the struck tool by adding an unbreakable reinforced polymer cap and oil-resistant cushion grip. The result - tools that are safer, more accurate and comfortable to use. Unbreakable, tough, reinforced polymer cap, 2-1/2 times the striking surface of a standard chisel - eliminates flying chips and mushrooming of chisel head; four cap diameters to match hammer sizes Comfortable grip reduces shock by up to 90%; oil and solvent resistant reduces hot/cold feel, enhances gripping ability. Noise level reduced by up to 80%. Hammer kickback and wrist-elbow trauma is minimized. The industrys sharpest and most accurate cutting edge Made in the U.S.A.
