Grex P6/35-2.5 23 Gauge 1-3/8-Inch Length Headless Pins (2,500 per box) |  | P6/35-2.5Grex Power Tools4.3 x 42 x 75 inches0.55 poundsPrice: Too low to display | |
|   | | Buy Grex P6/35-2.5 23 Gauge 1-3/8-Inch Length Headless Pins (2,500 per box) from Amazon | Preview product: Grex P6/35-2.5 23 Gauge 1-3/8-Inch Length Headless Pins (2,500 per box) | I have the GREX 635 pin nailer so I bought these pins for use in it. I have used these pins for many different jobs. I have used it to attach wooden cut-outs to my picket fence as well as for installing crown molding throughout my house. I never once experienced even a single pin jam, missfire, failure to insert below the surface of the wood or break. These pins have performed flawlessly and I highly recommend them.
WOW! This a GREAT pinner---soft nose, full 1 3/8' penetration in both cherry and oak with no dimples left behind.
I fired about 100 1 1/4' pins and experienced 3 jams. Ok, no biggie. Probably user error. However, clearing the first jam was an issue. The manual said to loosen the 2 front screws, slide off the front and remove the jam. The 3 allen wrenches that come with the tool were not the tool to use. A torx head driver is needed. The manual should say what is needed AND they should include the torx head driver with the pinner. I scratched up the screws trying to use a pair of pliars before I realized what was needed.
This nowithstanding, the P635 drives the pins effortlessly and countersinks in all kinds of wood. |
|
|
